Card A Day Blog Post: Get Well Soon

Hi everyone, thanks for stopping by. It's time again for me to post on the Card A Day Blog. This week's theme is, "Get Well Soon".

To make my card, I started off with a 5.5" x 4.25" white card base, then added a piece of patterned paper cut to 5.25" x 4" to the front of the card. I then cut out a piece of white cards stock at 5.25" x 2", inked the edges using Recollections dye ink pad, Marine, which I also inked my patterned paper with, and adhered it to the middle of the card. Over my white card stock piece, I attached a piece of dark blue card stock cut to 5" x 1 3/4", embossed with my Cuddlbug using the Swiss Dots embossing folder, For my sentiment, I used stamps from the Stamping Scrapping Designs Fancy Accents. I stamped the frame on a piece of white card stock first, using the same recollections ink pad that I used for my inked edges, then stamped the "Get Well Soon" sentiment from the same stamp set, then cut it out around the edge of the frame.

For the label that my sentiment is attached to, I used a die from the Spellbinders die set, Fancy Tags, out of yellow card stock, attached it to the center of my dark blue embossed piece, then adhered the sentiment on top of it using pieces of foam tape, to add dimension. Both die and stamp sets are designed to coordinate together.

I just had to add a little "bling" to my card, as I often do, so I added blue  Round Jewel Dazzles to the corners of my sentiment, and the corners of my card. I just love these little jewels, and I'm finding that I've been using them quite often on a lot of my projects.

I hope you like the card that I've created, and I would love if you leave me a comment. I always love to hear what people think about my creations. Please make sure to visit the Card A Day Blog every day for some wonderful card making ideas. Remember, if you like challenge, to check out our monthly challenge, for a chance to win a great prize!

Mojo Monday 275

Hi everyone! Here is the sketch for this weeks Mojo Monday contest.

Here is the card I made using the sketch.

To make my card, I used various patterned papers that I had in my stash, and the Spellbinders dies, Picot Edge Circles, and Standard Circles. For my sentiment  I used the "Have a fantastically magical day" stamp from the Birthday Surprise set from Verve stamps. The ribbon is from the Valentine's Mix, 20012 January Really Reasonable Ribbon collection. The flower is from Recollections. I added a dot of Viva Decor to the middle of the flower to make a little pearl accent.

Thanks for popping in and checking out the card I made. I really love the weekly sketches from Mojo Monday. Go check them out, I'm sure you'll love them too.

CADB Post: Hearts and Flowers

Hi everyone, it's a new year for us at the Card A Day Blog. This weeks theme is Valentine's Day, and here is my entry.

To make my card, I had to decide on an image that I want to use, I chose to use a section from the Lovely Layering Collage stamp from Outlines Rubber Stamps. I stamped the image on white card stock, cut out the section I wanted to use, then colored it, using Copic marker colors RV10, R32, R29 and BG34. To frame my image, I cut out a piece with the Lacy Squares die from Spellbinders, with red card stock, the placed my colored image to the left side of the piece. On the right side of the die cut piece, I adhered a piece of ribbon from the January 2012 Really Reasonable Ribbon Club Assortment. I then attached the die cut piece to a piece of white card stock measuring 3.5" x 3.5", then added that to a piece of red card stock cut to approximately 3.75" x 3.75".

To finish up my card front, I cut a piece of  red polka dot paper at 5.25" x 4" , then I placed my framed image to the top of the pattered paper. I then attached a strip of the shear red ribbon from the RRR assortment at approx 1/4 inch from the bottom of the patterned paper, then added a strip of red heart ribbon from American Crafts to the top of that. I then made myself a 5.5" x 4.25" white card base, I then placed my card front to the front of the the card base.

This card was intended to go to Operation Write Home for Valentine's, but I missed the deadline, so I might just send it off with my next shipment, because since it doesn't say Valentine's Day, it can be used for a general love card, or maybe I might put it aside and send it out for next Valentine's Day.

Thank you so much for stopping by, I hope you enjoyed my latest creation, and if you have the time, please leave me a comment and let me know what you think. Remember to visit the Card A Day Blog every day, for some wonderful card making inspiration, and make sure to enter our monthly challenge for a chance to win a great prize!

Card A Day Blog: Snow

Hello everyone, I hope everyone is having a great holiday season so far. This week's theme on the Card A Day Blog is, Snow. Here is the card that I made for my entry for this week.

I got the idea for this particular card from a card made by Joan B, from Paperlicious Thoughts and Images. To make my card, I started off with a 5.5" x 4.25" white card base. Since the theme is snow, I chose a paper with snowflakes for my background paper. I cut a zigzag across it with my Cricut, and my Sure Cuts A Lot program, then cut it to fit my card base, just a bit smaller than my card base, and leaving a gap, approximately 1/2 inch across the middle.

For my snowflake, I used a Stitched Snowflake Dazzle. I placed the Dazzle on top of a piece of light blue card stock paper, cut around the middle, then placed it on the left side of the pattered paper gap. I then stamped Merry Christmas in the paper gap to the right side of the card, then placed two more smaller snowflake Dazzles from the same sheet on either side of my sentiment.

To finish off my card, I added a little sparkle, by adding a rhinestone to the middle of the large snowflake, then adding little dots of Silver Viva Decor Glitter liner inside some of the snowflakes on the patterned paper. 

I really love this card design, and I hope you do too. If you have the chance, please leave me a comment, and let me know what you think. Don't forget to check out the Card A Day Blog every day for some great card making inspiration, and also, check out our monthly challenge, for a chance to win a great prize!

Card A Day Blog Post: Christmas Ornaments

It's my turn again to post to the Card A Day Blog, this weeks theme is Christmas ornaments. Here is the card that I made for my post.

To make my card, I started off with a 5.5" x 4.25" white card base, then added a piece of green card stock  paper cut to 5.25" x 4" to the front of the card. I then added a piece of patterned paper cut to 3.50 x 5.25 to the top of the card stock. 

For my ornament, I cut out the pieces using my Cricut, and the Sure Cuts A Lot program. The file for the ornament came from the Merriment collection, from Lettering Delights. I cut my pieces out of red, green and yellow card stock, then glued them together. To embellish my ornament, I used Thin Lines Dazzles, Red Jewel Sticker Dazzles, and Green Jewel Dazzles,  from Paper Wishes. I adhered the ornament to the left side of my card front. For a little extra sparkle, I added 3 Red Jewel Dazzles to the right side. On the inside, I stamped " Merry Christmas " in green ink.

Thank you for stopping by and checking out my creation, and if you would be so kind, please leave me a comment, and let me know what you think of it. Remember to stop by the Card A Day Blog each day for some wonderful card making inspiration. Don't forget to check out our monthly challenge. One lucky winner will get the chance to win a great prize!

Mojo Monday 266 Contest

One of my favorite places for inspiration, and some really great card sketches is Mojo Monday. This week I have decided to enter a card of my own, using the sketch for this week.

I needed a card to send for a fellow group member's birthday, so I decided I would make a birthday card for her and use that for my entry.

The papers I used were from Colorbok, the circle die cut was from the Spellbinders Lacy Circles set, the flowers are from Prima, and the sentiment is from the Verve Stamps stamp set, Circular Sayings.

Card A Day Blog: Christmas gift cards

Wow, it's hard to believe it's that time again. It's only the beginning of November, and they are already playing Christmas music at the mall...lol! I guess that's one way of getting ready for some Christmas creating, and here is another, my latest entry for the Card A Day Blog. This week's theme is , Christmas gift cards.

Here is the outside of my card, 

and here is the inside.

To make my card, I started off with a 5.5" x 4.25" white card base, then added a piece of patterned paper cut to 5.25" x 4" to the front of the card. I then cut out and embossed a mat frame with my Cuttlebug, and the largest die from the Spellbinders Nestabilities set, Floral Ovals, using red card stock. I wanted to add a little something to the edges, so instead of inking the edges, I decided to try embossing the edges with some red Zing glitter embossing powder, to add some shine to the edges. To do this, I pressed the edges of my die cut piece onto my Versamark pad, then sprinkled it with the glitter embossing powder, then heat set it. I then adhered that piece to the top of my patterned paper.

For the trees, I chose two of the tree stamps from the Just Rite Clear stamp set, O Christmas Tree, I stamped two of one stamp, and one of the other with Memento Tuxedo Black ink, and colored them with Copic Markers. For the gold trim on the trees, I used some of the border stickers from the Dazzles set, Gold Butterfly Dazzles. For the star on the middle tree, I embossed one of the stars from that same stamp set, added a dot of silver Viva Decor glitter liner to the middle of it, and glued it to the top of the tree. 

I placed the two trees that are the same, one on each side of my mat, then added the middle tree just a little lower than the outer trees, and adhered it with dimensional tape to raise it up a bit more than the other trees.

Now, for the inside of my card. I don't know where I got this idea from, but I know I saw it on another blog, that I lost track of when I wanted to make another card a while back that I wanted to add a gift card to, and I wanted to use the technique, so I had to go off what I could remember. So this is my version of it. I cut out two pieces of white copy paper, 5.5" x 5.25", and using my Scor Buddy,  I placed my paper with the 5.5" length going across, and scored one end at 1.5". I did this with both pieces of paper. I added adhesive to the sides of one of the 1.5" scored sections, and matched it up with the other piece, and stuck them together, leaving the inside open, so a gift card can be slipped inside. I then attached the two attached pieces to the inside of the card so that the gift card flap is on the fold. I then stamped my greeting on the bottom side of the inside of the card. 

Thank you for stopping by, and I hope you like my card, and that this will help if you need an idea for gift card giving. As always, I would love to hear what you think about what I create, and would love it, if you have the time, if you could please leave me a comment. Please be sure to stop by the Card A Day Blog every day for lots of card making inspiration, and be sure to check out our monthly challenge, for a chance to win a prize!